电气工艺工程师-水电

Job Description

1. Summary 概述

Prepare the manufacturing procedure for electrical components of generator, especially for stator winding, rotor pole, stator and rotor assembly. Maximize efficiency, minimize cost and produce required quality by continuous optimization of manufacturing process. 制订发电机电气部件,主要是定子线棒,磁极,定子和转子装配的制造工艺。通过不断持续优化工艺,在保证质量的前提下,实现最大化的生产效率,最大限度地降低成本。

2. Job Description岗位职责

l  Design review and give the feedback to design engineer. 设计会签,给设计工程师提出反馈意见。

l  Prepare manufacturing procedure and routing according to drawings, ITP, etc. 按照设计图纸、质量检验计划编制制造工艺文件和工艺流程。

l  Initiate the fixture & tooling for manufacturing process. 为制造过程中需要的工装&工具提出需求。

l  Estimate manufacturing hours for each manufacturing operation. 估算生产制造过程中的工序工时。

l  Support to train the shop floor operators for critical operations. 对于关键工序,为车间工人培训提供技术支持。

l  Process monitoring,specially in critical operations, such as the hot press, taping, VPI and curing, electrical test in stator bar and the pole coil pressing and curing, final tests of pole. 工艺过程监控,尤其是对关键过程,如定子线棒的热压、主绝缘包带、真空浸渍及固化、电气测试,磁极线圈绝缘的热压固化和最终电气测试等的监控。

l  Set up and adjust the manufacturing parameters. 为生产设备设置工艺参数及日常调整。

l  Technical support for workshop, purchasing, quality and field service. 为车间、采购、质量管理和现场提供技术支持。

l  Hour estimation and manufacturing proposal for OTO project. 提供投标阶段的工时估算和生产技术方案。

 

3. Required Knowledge and Skill 所需的知识和能力

l  University degree, Bachelor, major in Electrical Machine or Chemical engineer or the relevant. 具有电机工程,化学工程或相关专业学士学位;

l  Background in electrical machine industry, experiences in manufacturing process, familiar with the principle of electrical machine, understand the relevant standards for electrical machine. It is preference to have manufacturing experience in electrical parts in large high-voltage electrical machine. 有电机制造行业工作背景,具备工艺工作经验,熟悉电机基本理论,了解与电机制造相关的标准;有大型高压电机电气部件制造经验者优先。

l  Familiar with the manufacturing process of stator winding and pole, understand the manufacturing flow of correlative parts. Ability to prepare the scheme of manufacturing process for electrical components and complete relevant documents independently. 熟悉定子绕组和磁极部件的制造工艺,了解相关零部件的制造流程;可以独立完成电气部件工艺方案并编制相关工艺文件

l  Familiar with the special devices commonly used in electrical components manufacturing process; 熟悉电气部件制造工艺中常用的专用工艺装备

l  Ability to analyze the root cause of problem,and solve problem; 具备分析产生问题原因、解决问题的能力

l  Ability of team working; 具备团队工作的能力

l  Careful and responsible working attitude; Ability of working under pressure. 认真负责的工作态度,可以承受工作压力;

l  Computer skill in MS Office software, Computer Aided Design software能熟练使用办公室自动化软件和计算机辅助设计软件;

l  Skill of Written and read English具有熟练读写英语的能力。

 
×