Programador/a PLC´s

Asturias
Spain
Full time
Job Information

Buscamos incorporar un/a Programador/a de PLCs para participar en proyectos de automatización industrial, integración de sistemas y comunicaciones IT/OT.

Ubicación: Llanera (Asturias)
Modalidad: Presencial (Onsite)

¿Cuál será tu papel?

  • Gestionar y desarrollar proyectos de automatización orientados a la monitorización y control de parámetros ambientales y de proceso.

  • Diseñar, programar y poner en marcha PLCs de diferentes fabricantes, principalmente Phoenix Contact y Siemens, bajo el estándar IEC 61131.

  • Integrar soluciones de Industria 4.0 y Big Data mediante drivers y software, conectando sistemas industriales con entornos IT/OT.

  • Participar en puestas en marcha, mantenimiento y resolución de incidencias en instalaciones.

  • Dar soporte técnico durante las distintas fases del proyecto y mantener contacto con clientes y equipos de campo.

  • Identificar nuevas tecnologías y soluciones para evolucionar los sistemas existentes.

¿Qué experiencia necesitamos?

Formación y experiencia:

  • Ingeniería en Electrónica, Automática, Industrial o FP de Grado Superior relacionada.

  • Al menos 5 años de experiencia en programación avanzada de PLCs y desarrollo de sistemas de control y adquisición de datos.

Conocimientos técnicos imprescindibles:

  • PLCs Phoenix Contact y Siemens.

  • Estándar de programación IEC 61131.

  • C++, JavaScript, SQL y scripting.

  • Docker y Linux.

  • Redes: TCP/IP, HTTP/HTTPS, APIs REST, WebSockets, routers, firewalls, NAT y VPN.

  • Comunicaciones industriales: RS-232/RS-485, Modbus RTU y Modbus TCP.

  • Diagnóstico de incidencias de comunicación en entornos IT/OT.

  • Interpretación de esquemas eléctricos y documentación de instrumentación.

  • Inglés B2.

¿Qué conocimientos suman puntos?

  • Structured Text (ST/SCL), Beckhoff o CODESYS.

  • MQTT, Profinet, Profibus e IO-Link.

  • Desarrollo de drivers y bloques de comunicación.

  • Git y CI/CD.

  • Ciberseguridad industrial y segmentación de redes IT/OT.

  • Puestas en marcha de instalaciones industriales.

  • Experiencia en sistemas de monitorización ambiental, calidad del aire o estaciones meteorológicas.

  • Conocimientos de ISO/IEC 17025 y normativa de calidad del aire, emisiones y baja tensión.

Apply for this job

Submit your application here.

Apply now
Consultant
Melissa Bringas
Melissa Bringas
Consultant
Share This Job
Share on Telegram

Related Vacancies

Engineering - Electrical & ElectronicsInformation Technology & SoftwareFull time
Programador/a PLC´s
Asturias, Spain
Full time
Buscamos incorporar un/a Programador/a de PLCs para participar en proyectos de automatización industrial, integración de sistemas y comunicaciones IT/OT. Ubicación: Llanera (Asturias) Modalidad: Presencial (Onsite) ¿Cuál será tu papel? Gestionar y desarrollar proyectos de automatización orientados a la monitorización y control de parámetros ambientales y de proceso. Diseñar, programar y poner en marcha PLCs de diferentes fabricantes, principalmente Phoenix Contact y Siemens, bajo el estándar IEC 61131. Integrar soluciones de Industria 4.0 y Big Data mediante drivers y software, conectando sistemas industriales con entornos IT/OT. Participar en puestas en marcha, mantenimiento y resolución de incidencias en instalaciones. Dar soporte técnico durante las distintas fases del proyecto y mantener contacto con clientes y equipos de campo. Identificar nuevas tecnologías y soluciones para evolucionar los sistemas existentes. ¿Qué experiencia necesitamos? Formación y experiencia: Ingeniería en Electrónica, Automática, Industrial o FP de Grado Superior relacionada. Al menos 5 años de experiencia en programación avanzada de PLCs y desarrollo de sistemas de control y adquisición de datos. Conocimientos técnicos imprescindibles: PLCs Phoenix Contact y Siemens. Estándar de programación IEC 61131. C++, JavaScript, SQL y scripting. Docker y Linux. Redes: TCP/IP, HTTP/HTTPS, APIs REST, WebSockets, routers, firewalls, NAT y VPN. Comunicaciones industriales: RS-232/RS-485, Modbus RTU y Modbus TCP. Diagnóstico de incidencias de comunicación en entornos IT/OT. Interpretación de esquemas eléctricos y documentación de instrumentación. Inglés B2. ¿Qué conocimientos suman puntos? Structured Text (ST/SCL), Beckhoff o CODESYS. MQTT, Profinet, Profibus e IO-Link. Desarrollo de drivers y bloques de comunicación. Git y CI/CD. Ciberseguridad industrial y segmentación de redes IT/OT. Puestas en marcha de instalaciones industriales. Experiencia en sistemas de monitorización ambiental, calidad del aire o estaciones meteorológicas. Conocimientos de ISO/IEC 17025 y normativa de calidad del aire, emisiones y baja tensión.
Engineering - Mechanical & IndustrialEngineering - Electrical & ElectronicsFull time
Desarrollador de Firmware para Dispositivos IoT
Llanera, Spain
Full time
Buscamos un perfil con experiencia en sistemas embebidos, que disfrute trabajando cerca del hardware y participando en el desarrollo de dispositivos IoT desde su base. ¿En qué trabajarás? Desarrollo y optimización de firmware para dispositivos IoT con C++ embebido. Programación sobre microcontroladores ESP32 utilizando ESP-IDF y CMake. Implementación de comunicaciones Wi-Fi, Ethernet, Bluetooth, GSM/LTE y LoRaWAN. Integración de sensores ambientales: temperatura, humedad, gases, partículas y COV. Gestión de tareas y concurrencia mediante FreeRTOS. Desarrollo de drivers e integración de interfaces I2C, SPI, UART y RS485. Debugging, validación y optimización del consumo energético de los dispositivos. Participación en proyectos de I+D y evolución de nuevas soluciones tecnológicas. ¿Qué experiencia buscamos? Al menos 2 años desarrollando firmware o software embebido. C++ y programación orientada a objetos. Experiencia práctica con ESP32, ESP-IDF y CMake. Conocimientos de FreeRTOS y programación concurrente. Experiencia con protocolos de comunicación y drivers de hardware. Manejo de herramientas de debugging como JTAG, GDB u OpenOCD. Git y control de versiones. También valoraremos: Python, KNX, BACnet y experiencia en proyectos IoT industriales o de monitorización medioambiental. Es una oportunidad interesante si te gusta trabajar en la parte más cercana al hardware, desarrollar soluciones desde bajo nivel y participar en proyectos donde firmware, electrónica y comunicaciones van de la mano.
Engineering - Electrical & ElectronicsFull time
Fire Alarm Project Manager
United Kingdom
GBP 45000 - 65000 Year
Full time
Location: Stevenage, Hertfordshire Salary: £45,000 – £65,000 DOE Hours: Monday–Friday, 8:30am–5:30pm Benefits: Company Vehicle | 23 Days Holiday + Bank Holidays | Pension Are you an experienced Fire Alarm Installation Manager or Project Manager looking for your next opportunity? We are recruiting for an established fire and security company specialising in the design, installation and maintenance of fire alarm and life safety systems. This is a fantastic opportunity to take ownership of fire alarm installation projects, manage a team of engineers and oversee projects from initial quotation through to completion. Key Responsibilities Manage fire alarm installation projects from start to finish. Coordinate installation engineers, workloads and project schedules. Ensure projects are delivered on time and within budget. Liaise with customers, contractors and internal teams. Prepare quotations, estimates and tenders for new installations. Carry out site surveys and review technical specifications. Oversee materials, equipment orders and project variations. Provide technical support and resolve installation issues. What We're Looking For Experience as a Fire Alarm Installation Manager, Fire Project Manager, Installation Supervisor or similar. Strong technical knowledge of conventional and addressable fire alarm systems. Experience managing engineers and coordinating installations. Ability to manage multiple projects and meet deadlines. Estimating or quotation experience would be advantageous. Excellent communication and organisational skills. Full UK driving licence. What's on Offer? £45,000 – £65,000 salary , depending on experience. Company vehicle. 23 days' holiday plus bank holidays. Company pension. Company mobile phone and laptop where applicable. Established business with a strong pipeline of installation projects. If you have experience managing fire alarm installations and are ready for your next challenge, apply today!
Technology & Internet ServicesSecurity, Safety & Risk ServicesFull time
Product Marketing Manager: Data Protection-as-a-Service
Aarhus, Denmark
Competitive Package
Full time
Product Marketing Manager: Data Protection-as-a-Service Location: Aarhus or Copenhagen, Denmark (hybrid) Reports to: Head of Commercial Team: One direct report, Travel: 10–20% Our client has protected the mission-critical data of enterprises and managed service providers for more than two decades. It runs backup, storage and business continuity as fully managed services from its own EU data centres, executes more than 70 million backup jobs a year, and holds ISO 27001 and ISO 22301 certification alongside independent assurance reports for NIS2 and DORA. The business is successful. What it has not yet built is the commercial engine to match. Following a recent private equity investment, that is now the priority: first in Denmark, then across Europe. This is the first hire in that build. You will define who the company is for, why those buyers should care, and how it reaches them, and then make sure Sales, Customer Success, Product and Marketing all work from the same answer. What you will own Market definition. The Ideal Customer, Partner and Alliance Profiles, kept current with win/loss data and field feedback. Positioning and messaging. Value propositions by segment and route to market, and a message hierarchy from company narrative down to product proof points. Pricing and packaging logic. How price communicates value, and how it is explained consistently across direct and partner channels. The commercial asset base. Sales decks, solution briefs, battlecards, case studies and partner enablement content, with one current version of each and clear ownership. The feedback loop. Structured market input to Product and Engineering, grounded in evidence from deals and customers. A team. You will hire and lead the Marketing Operations Manager who turns your direction into campaigns and pipeline. This is not a campaign role. It is a positioning, enablement and commercial clarity role. What you will bring 7+ years in B2B technology marketing or commercial roles, with at least 5 in dedicated product marketing. Experience in backup, storage, business continuity or closely related managed infrastructure services. You are comfortable with a technical, sceptical buyer. Direct ownership of a go-to-market motion, and real time spent with sales teams: in deals, hearing objections, building materials that get used. Partner or channel experience, ideally with managed service providers. Involvement in pricing strategy. The confidence to challenge assumptions about who the business is for, and the rigour to document the answer. Currently resident and working in Denmark. Why consider it A blank sheet, with substance behind it. The customers, certifications and track record are already there. The story has yet to be told properly. Backing and mandate. A new investor committed to building the commercial side, and a reporting line straight to the CRO. A market with deadlines. NIS2 and DORA have turned recovery and resilience into board-level questions. Based in Aarhus or Copenhagen. A senior commercial role in East Jutland, with hybrid working. A competitive base salary and variable component are on offer, to be discussed at first conversation. Interested? If this sounds like the role you have been preparing for, or you would simply like to understand more before deciding, I would be glad to talk it through in confidence. Please apply below. Nothing is shared with our client without your agreement. Peter Wharton, Founder and Managing Partner, Antal International, Geneva
Information Technology & SoftwareIT ServicesFull time
Sr. Frontend Developer
Please Select, India
Full time
Job Title: Senior Frontend Developer / Technical Lead – Angular Experience: 5–10 years Location: Remote – India Working Hours: 4:30 PM–1:30 AM IST Industry: Enterprise SaaS / Software Products About the Opportunity Our client, an enterprise SaaS company serving global customers, is seeking a hands-on Senior Frontend Developer to build scalable web applications, own frontend architecture and mentor engineers. This is a senior individual contributor role with technical leadership responsibilities and an opportunity to grow into formal team leadership. Key Responsibilities Design and develop large-scale applications using Angular and TypeScript, with modular architecture and reusable components. Build complex multi-step forms, configuration-driven screens, role-based workflows and data-rich interfaces. Optimise application performance through efficient rendering, change detection, lazy loading and virtualisation. Collaborate with backend engineers on API integration, error handling and reliable frontend–backend interactions. Develop reusable UI patterns and contribute to design systems and maintainable CSS/SCSS architecture. Help deliver AI-enabled user experiences, including copilots, recommendations, guided actions and summarisation. Maintain high standards for automated testing, accessibility, security, maintainability and production readiness. Mentor developers, review code and contribute to architecture decisions and implementation planning. Work closely with Product, Design, Backend and QA teams to deliver reliable releases. Required Skills and Experience 5–10 years of frontend development experience building complex product applications, preferably in enterprise software or SaaS. Strong hands-on expertise in Angular, TypeScript and JavaScript. Experience designing frontend architecture for large applications with interdependent modules and workflows. Experience building complex forms, permissions-driven interfaces and reusable components. Strong understanding of frontend performance optimisation, change detection and list or grid virtualisation. Proficiency in HTML, CSS and SCSS. Practical experience with automated testing across components, services and API boundaries. Ability to take technical ownership, mentor developers and maintain engineering standards. Willingness to work consistently from 4:30 PM to 1:30 AM IST. Preferred Skills Experience building or integrating AI-powered product interfaces is a strong advantage. Exposure to design systems, Tailwind CSS and real-time applications. Familiarity with CI/CD pipelines, modern build tools and release processes. Understanding of accessibility, application monitoring and secure frontend development. Experience collaborating with global stakeholders in Agile teams. Qualification Bachelor’s degree in Computer Science, Engineering or a related discipline preferred. Key Skills Angular, TypeScript, JavaScript, Frontend Architecture, Enterprise Applications, SaaS, Reusable Components, Reactive Forms, Performance Optimisation, HTML, CSS, SCSS, REST APIs, Automated Testing, Technical Leadership, AI Integration
Engineering - Mechanical & IndustrialEngineering - Electrical & Electronics
Senior Project Engineer
Dubai, United Arab Emirates
AED 18,000 – 20,000/month
Senior Project Engineer – MEP Job Reference: ANT-SPE-R-20261114 Location: Dubai, UAE Industry: Engineering / Construction / MEP Functional Area: Engineering – Projects Specialization: MEP / Mechanical / Electrical Engineering Employment Type: Full-Time Working Hours: 48 Hours per Wee Job Overview Seeking an experienced Senior Project Engineer – MEP for a Dubai-based opportunity. The successful candidate will be responsible for leading and coordinating the engineering and site execution of assigned MEP projects, covering HVAC, electrical, plumbing, drainage and associated systems. The position requires strong technical coordination, site execution capabilities, resource management and the ability to ensure project progress in accordance with approved drawings, specifications, quality standards, HSE requirements and project schedules. Key Responsibilities 1. Project Execution & Programme Control Translate approved project programmes into coordinated site execution and weekly look-ahead plans. Monitor actual versus planned progress and recommend recovery actions. Coordinate work fronts, site access, interfaces and sequencing across MEP disciplines and subcontractors. 2. Engineering & Technical Coordination Review IFC drawings, shop drawings, specifications, BOQs and coordinated MEP layouts. Coordinate RFIs, material submittals, method statements, ITPs and consultant comments. Resolve installation interfaces across HVAC, electrical, plumbing, drainage, civil and architectural works. 3. Quality Assurance & Inspections Ensure site execution complies with approved drawings, specifications and quality plans. Coordinate inspections, MIRs/WIRs, testing records and corrective actions. Monitor NCRs, snags and installation quality to minimise rework. 4. HSE & Safe Work Execution Ensure compliance with RAMS, PTW, LOTO and applicable site safety requirements. Coordinate with HSE teams on inspections, toolbox talks and safety observations. Escalate unsafe working conditions and support corrective actions. 5. Manpower, Material & Subcontractor Coordination Forecast manpower, tools, equipment, materials and subcontractor requirements. Coordinate procurement priorities, material approvals and site deliveries. Monitor subcontractor progress, productivity and workmanship. 6. Productivity & Cost Control Support Monitor labour productivity, completed quantities and material consumption. Identify potential variations, additional works and project delays. Maintain supporting site records and provide progress information for billing and cost control. 7. Client, Consultant & Internal Coordination Coordinate with clients, consultants, procurement, planning, QA/QC, HSE and subcontractors. Participate in site coordination and progress meetings. Maintain action trackers and escalate critical project issues to the Project Manager. 8. Testing, Commissioning & Handover Coordinate pre-commissioning checks and integrated MEP testing. Monitor snag rectification and support authority and client inspections. Coordinate as-built drawings, O&M manuals, test certificates, warranties and handover documentation. 9. Team Supervision & Project Reporting Guide Project Engineers, Site Engineers, Supervisors and assigned site teams. Maintain daily progress records, drawing and submittal logs, inspection trackers and material status. Prepare progress updates and report technical, quality, HSE and resource-related issues to the Project Manager. Desired Candidate Profile Engineering background in Mechanical, Electrical or a related discipline. Practical experience in MEP project engineering and site execution. Strong understanding of HVAC, electrical, plumbing and drainage systems. Experience reviewing IFC drawings, shop drawings, BOQs and technical specifications. Knowledge of RFIs, material submittals, method statements and inspection procedures. Experience coordinating multidisciplinary site teams and subcontractors. Understanding of quality assurance, HSE requirements, PTW and site safety procedures. Ability to monitor project progress, manpower, materials and productivity. Strong coordination, reporting, problem-solving and communication skills. Reporting Structure Reports To: Project Manager Team Coordination: Project Engineers, Site Engineers, Supervisors and assigned site execution teams. Application Interested professionals with relevant MEP engineering and project execution experience are invited to submit their updated CV. All candidate applications and communications will be handled confidentially by Antal International.
Engineering - Mechanical & IndustrialCivil Engineering & ConstructionFull time
Senior Project Manager
Dubai, United Arab Emirates
AED 25,000 – 30,000+/month
Full time
Senior Project Manager – MEP / Electromechanical Job Reference: ANT-SPM-20261114 Location: Dubai, UAE Industry: Electromechanical / MEP Contracting Employment Type: Full-Time Working Hours: 48 Hours per Week Recruitment Partner: Antal International Job Overview Antal International is currently seeking an experienced Project Manager for a leading organisation in the Electromechanical sector in Dubai. The successful candidate will be responsible for the end-to-end planning, execution, technical coordination, cost control, quality, HSE, testing, commissioning and handover of assigned MEP projects. The role requires strong project management capabilities, technical expertise and the ability to ensure project delivery within approved scope, schedules, budgets and contractual requirements. Key Responsibilities 1. Project Planning & Execution Review contract scope, BOQ, specifications and drawings. Prepare project execution plans and baseline schedules. Lead project kick-off, mobilisation and site execution. Monitor project progress and implement recovery plans where required. 2. Project Cost & Commercial Control Prepare and control project budgets, expenditure and profitability forecasts. Monitor labour, material, equipment and subcontractor costs. Identify variations and claims. Coordinate billing, certification and payment follow-ups. 3. Technical & Engineering Coordination Review shop drawings, material submittals, RFIs, method statements and technical specifications. Coordinate HVAC, electrical, plumbing and related MEP services. Resolve technical clashes and ensure compliance with approved designs and authority requirements. 4. Resource, Procurement & Subcontractor Management Plan manpower, equipment, materials and subcontractor deployment. Coordinate procurement schedules and material availability. Monitor subcontractor progress, quality, productivity and contractual obligations. 5. Quality & HSE Compliance Ensure compliance with approved quality plans and project specifications. Coordinate inspections, audits, NCRs and corrective actions. Ensure implementation of risk assessments, method statements, PTW and site safety controls. 6. Client & Stakeholder Management Coordinate with clients, consultants and project stakeholders. Attend progress meetings and resolve technical and project delivery concerns. Manage contractual correspondence, approvals and commitments. 7. Project Team Leadership Lead Project Engineers, Site Engineers, Supervisors and project execution teams. Allocate responsibilities and monitor team performance. Conduct project coordination meetings and ensure accountability. 8. Reporting & Risk Management Maintain project schedules, cost, manpower, procurement, variation and risk trackers. Prepare weekly progress and monthly project MIS reports. Identify and escalate project risks with appropriate mitigation plans. 9. Testing, Commissioning & Handover Coordinate inspections, testing, commissioning and performance verification. Manage snag lists, as-built drawings, O&M manuals, warranties and close-out documentation. Obtain client acceptance and coordinate final account and service handover. Key Performance Expectations Achieve project milestones within approved timelines. Maintain project cost variance within approved tolerance. Ensure timely technical submissions and approvals. Maintain quality and HSE compliance. Ensure effective resource and subcontractor management. Complete testing, commissioning and contractual handover milestones. Reporting Structure Reports To: Head of Operations Direct Team Responsibility: Project Engineers, Site Engineers, Supervisors and Project Execution Teams. Application Interested professionals with relevant MEP / Electromechanical project management experience are invited to share their updated CV.
Information Technology & Software
Sales Specialist – Red Hat Solutions
State of Mexico
$18,000 + $12,000 en variables mensuales por alcance de metas
Sales Specialist – Red Hat Solutions Ubicación: México Experiencia: 1 a 3 años en ventas de soluciones tecnológicas Inglés: Intermedio–avanzado Salario: $18,000 + $12,000 en variables mensuales por alcance de metas ¡Impulsa tu carrera en el sector tecnológico! Estamos buscando un Sales Specialist – Red Hat para integrarse a una importante empresa del sector tecnológico, con enfoque en el desarrollo de negocio, comercialización de soluciones de infraestructura y nube, y fortalecimiento de relaciones estratégicas con fabricantes, partners y clientes empresariales. Principales responsabilidades Desarrollar nuevas oportunidades comerciales para el portafolio de soluciones Red Hat. Prospectar y gestionar relaciones con clientes B2B, integradores y canales de distribución. Administrar el ciclo comercial completo, desde la identificación de oportunidades hasta el cierre. Impulsar estrategias de generación de demanda y crecimiento comercial. Colaborar con fabricantes, equipos de preventa y socios comerciales para desarrollar propuestas de valor. Gestionar pipeline, forecast y cumplimiento de objetivos de ventas. ¿Qué buscamos? 1 a 3 años de experiencia en ventas B2B de soluciones tecnológicas. Experiencia comercial con fabricantes, mayoristas, distribuidores, integradores o canales de TI. Conocimiento de soluciones de infraestructura empresarial, cloud, software empresarial u Open Source. Familiaridad con tecnologías como Red Hat, RHEL, OpenShift, Linux o soluciones similares (altamente deseable). Experiencia en prospección, desarrollo de negocio, negociación y cierre de ventas. Habilidades de comunicación, orientación a resultados y gestión de relaciones comerciales. Inglés intermedio–avanzado. Valoramos especialmente Experiencia comercializando soluciones Red Hat. Conocimiento del ecosistema de canales y partners tecnológicos. Experiencia en ventas consultivas de soluciones Cloud, Hybrid Cloud o infraestructura empresarial. ¿Por qué esta oportunidad? Tendrás la posibilidad de especializarte en un portafolio tecnológico de alto valor, desarrollar relaciones estratégicas dentro del ecosistema IT y participar activamente en el crecimiento comercial de soluciones empresariales.
Information Technology & SoftwareFull time
DATA ENGINEER SENIOR – MICROSOFT FABRIC
Madrid, Spain
Full time
Buscamos incorporar un Senior Data Engineer especializado/a en Microsoft Fabri c para participar en un proyecto de transformación y evolución de la arquitectura de datos hacia un entorno 100% Cloud. El proyecto contempla la integración y modernización de diferentes plataformas empresariales, trabajando con tecnologías del ecosistema Microsoft como Dynamics 365, Business Central, Azure, Dataverse y Microsoft Fabric. La posición tendrá un papel relevante en el diseño, desarrollo y mantenimiento de soluciones de ingeniería de datos, participando en la construcción de procesos ETL/ELT, organización de datos y desarrollo de modelos analíticos orientados a la explotación de la información. Se busca un perfil con autonomía técnica, capacidad para abordar desarrollos complejos y visión global de las soluciones de datos. También tendrá la oportunidad de participar progresivamente en decisiones relacionadas con el diseño y la arquitectura de datos. Responsabilidades Diseñar, desarrollar y mantener procesos de ingesta y transformación de datos mediante ETL/ELT, utilizando Data Pipelines y Dataflow Gen2. Construir y organizar arquitecturas de datos en Microsoft Fabric, trabajando con OneLake, Lakehouse y Data Warehouse. Implementar arquitecturas basadas en el enfoque Medallion (Bronze, Silver y Gold), garantizando la trazabilidad, calidad y disponibilidad del dato. Desarrollar procesos de limpieza, normalización y transformación de datos. Implementar mecanismos de carga incremental, controles de calidad y monitorización de procesos, incluyendo la gestión y resolución de errores. Diseñar y desarrollar modelos de datos analíticos orientados a su explotación mediante Power BI. Optimizar procesos de ingesta y transformación, asegurando la eficiencia y escalabilidad de las soluciones. Documentar los procesos, transformaciones y modelos de datos implementados. Participar en la definición y evolución de la arquitectura de datos, aportando propuestas de mejora y buenas prácticas. Requisitos 6-7 años de experiencia consolidada como Data Engineer. Experiencia demostrable trabajando con Microsoft Fabric y autonomía para desarrollar soluciones de ingeniería de datos. Conocimiento práctico de OneLake, Lakehouse y Data Warehouse. Experiencia desarrollando procesos ETL/ELT mediante Data Pipelines y/o Dataflow Gen2. Dominio de SQL y experiencia en modelado dimensional. Experiencia en implementación de cargas incrementales, controles de calidad y procesos de transformación de datos. Conocimiento y aplicación de arquitecturas Medallion (Bronze, Silver y Gold). Capacidad para trabajar con autonomía, resolver problemas técnicos y tomar decisiones sobre las soluciones desarrolladas. Se valorará especialmente Experiencia integrando datos procedentes de Dynamics 365 y Business Central. Conocimientos de PySpark y desarrollo de transformaciones mediante notebooks. Experiencia con servicios de Microsoft Azure relacionados con ingeniería de datos. Participación previa en el diseño de arquitecturas de datos o definición de soluciones técnicas. Interés en asumir progresivamente mayores responsabilidades en diseño y arquitectura de datos.
Engineering - Mechanical & IndustrialChemicals, Petrochemicals & MaterialsFull time
Ingénieur R&D textile (59) – Ennoblissement, finition et industrialisation (H/F)
lille, France
Full time
À propos d’Antal International Antal International accompagne les entreprises industrielles dans le recrutement de profils techniques, scientifiques et managériaux. Notre expertise des métiers du textile et de la chimie nous permet d’appréhender les enjeux du poste, du développement produit à la mise en fabrication. À propos de notre client Notre client conçoit et fabrique des textiles techniques pour l’ameublement et la protection solaire . Membre d’un groupe international, il s’appuie sur un savoir-faire textile français et sur la collaboration entre les équipes de développement, de production et de qualité. L’innovation, l’exigence de qualité et l’esprit d’équipe guident le développement de ses nouvelles collections. Le poste Rattaché au Responsable Développement, vous pilotez les projets d’ ennoblissement textile , depuis la mise au point des recettes de finition jusqu’à leur validation industrielle. Votre rôle consiste à trouver les solutions qui répondent aux performances attendues du tissu et à définir les conditions permettant de les reproduire en production. Vous accompagnez également l’industrialisation des nouvelles collections, avec un périmètre qui couvre l’ourdissage, le tissage et la finition. Vos principales responsabilités Développer et optimiser les recettes de finition textile avec le technicien R&D et les fournisseurs de produits chimiques, en tenant compte des propriétés recherchées et des contraintes de fabrication. Concevoir les essais en laboratoire et en atelier , analyser les résultats et définir les paramètres à valider à l’échelle industrielle. Piloter la validation industrielle des nouvelles collections , coordonner les intervenants internes et externes et suivre les préséries. Assurer le transfert en production en transmettant aux équipes Production et Qualité les recettes et les paramètres de procédé validés. Apporter un appui technique lors de la mise en fabrication. Suivre les exigences réglementaires et normatives applicables aux produits chimiques et aux textiles, notamment REACH et OEKO-TEX® . Profil recherché Vous êtes titulaire d’un diplôme d’ingénieur ou d’une formation équivalente en textile, avec une spécialisation en ennoblissement, finition ou chimie textile . Votre parcours vous a permis de conduire des projets de développement, d’interpréter des résultats d’essais et de les traduire en décisions applicables en production. Vous appréciez le travail en atelier autant que l’analyse en laboratoire. Votre rigueur expérimentale, votre autonomie et votre capacité à dialoguer avec les fournisseurs et les équipes de production vous permettent de faire avancer plusieurs projets. L’anglais professionnel est indispensable. Des déplacements sont à prévoir selon les projets. Pourquoi rejoindre cette entreprise ? Vous suivez vos projets jusqu’à leur mise en fabrication et mesurez directement l’effet de vos choix sur les propriétés du tissu et la reproductibilité du procédé. La diversité des collections vous permet de travailler à la fois sur de nouvelles finitions et sur l’amélioration des procédés existants. L’appartenance à un groupe international offre des possibilités d’échange avec d’autres spécialistes. Selon vos aspirations et les opportunités internes, vous pourrez approfondir votre expertise technique ou évoluer vers le pilotage de projets plus larges en développement produit et industrialisation .